37
Symptom
$
Server’s power LED fails to light
even when the power switch is ON.
Suggested remedial action
O
Has the power cord been connected?
O
Do the installed fuses have the rated amperage?
$
No display on the display panel
even though the power switch is
on.
$
The buzzer continues to sound
after the operation LED has lighted.
O
Something has malfunctioned.
Check on the display panel.
$
No control can be exercised using
RS-422A.
O
Have the cables been connected properly?
O
Is the server mode set to LOCAL?
Check on the display panel.
$
There is no sound.
O
Are the cables connected properly?
O
There is no audio output during playback at speeds lower than 1
a
speed.
$
Video recording stops at an interim
point.
O
Is there space on the HDD?
Check remaining time on the display panel or using Odetics/Louth
protocol.
O
Is access to the HDD delayed?
O
Is there anything wrong with the input signal?
O
Is FC cable connected properly?
Troubleshooting
O
Has the power been turned back on immediately after it was turned
off?
Wait at least 10 seconds after turning off the power before turning it
back on.