Panasonic AJ-HDC27VP, Руководство по эксплуатации

Страница: 101 / 119

101
Setting menu screens
(VTR MAIN MENU)
MIC/AUDIO screen
The MIC/AUDIO settings are performed on this
screen.
Item
Variable
range
Remarks
VF
display
Item
Variable
range
Remarks
VF
display
MIC LOWCUT
CH2 FRONT
REAR
F&R
OFF USER
ENG For setting the high-pass
filter for the CH2 mic input.
FRONT: The high-pass filter
for the front mic
input is set to ON.
REAR : The high-pass filter
for the rear mic
input is set to ON.
F&R : The high-pass
filters for both the
front and rear mic
inputs are set to
ON.
OFF : The high-pass filter
for the CH2 input
is set to OFF.
LIMITER ON
OFF USER
ENG For switching the audio
limiter to ON or OFF.
ON : The limiter operates.
OFF : The limiter does not
operate.
TEST TONE NORMAL
ALWAYS
OFF
CHSEL USER
ENG NORMAL:
The test tone signal is
output when the AUDIO
IN switch for CH1 is set
to front while BAR is
selected as the
CAM/BAR switch setting.
ALWAYS:
The test tone signal is
always output when BAR
is selected as the
CAM/BAR switch setting.
OFF:
The test tone signal is
not output.
CHSEL:
The test tone signal is
output for the selected
channel when the
AUDIO IN switch CH1 or
CH2 is set to front while
BAR is selected as the
CAM/BAR switch setting.
REC CH3/CH4 CH1/2
CH3/4 USER
ENG For setting the audio
signals to be recorded on
the CH3 track and CH4
track.
CH1/2:
The CH1 signal is
recorded on the CH3
track, and the CH2
signal is recorded on the
CH4 track.
CH3/4:
The CH3 and CH4
signals which are
supplied from the
camera adapter are
recorded.
CUE SELECT SIDE SW
CH1
CH2
MIX USER
ENG For setting the audio
signals to be recorded on
the cue track.
SIDE SW:
The signals selected by
the CUE switch on the
side panel are recorded.
CH1:
The CH1 signals are
recorded.
CH2:
The CH2 signals are
recorded.
MIX:
The CH1 and CH2
mixed signals are
recorded.
CUE REC ON
OFF USER
ENG For setting whether
signals are to be recorded
on the cue track.
ON : The signals will be
recorded on the cue
track.
OFF : The signals will not
be recorded on the
cue track.
The power-saving
mode is established.
The underlining in the variable range column indicates the setting in the preset mode.
<Note>
The frequency characteristics in the MIC LOWCUT ON mode are
200 Hz to 10 kHz.