The screen shown below appears when the sequence editor starts.
– 24 –
4-2. Checking the editing functions
Proceed to check the editing operations using the same limited edition of the
editing software program which was used in the last section. Upload several
clips to the AV disk in advance to use in checking the operations.
If the clips registered in the bin have been erased, return to the previous
section (4-1.), create several fresh clips and play them back to check that no
noise or disturbances are present.
The sequence editor is used to check the editing operations.
1. Click the
button from the Toolbox to start the
sequence editor.
