47
Setup Menus
131
LIGHT SET UP
0000
0001
OFF
ON
For setting whether LCD backlight illumination status is to be stored in the
memory when the power is switched off.
0: Status is not stored. When the power is turned back on, the backlight
illumination will always be off.
1: Status is stored.
132
26PIN REC
0000
0001
ALL
REC-P
OPERATION menu
Item
Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
The underlining indicates the factory setting.
130
NO-VIDEO REC
0000
0001
OFF
ON
For setting whether to proceed with recording when no video signals are
input.
0: Recording is disabled. When the video signals are no longer input during
recording, operation is transferred to the REC PAUSE mode.
1: Recording is enabled.
For setting whether to acknowledge the REC command when the camera’s
START/STOP button is used for control while connection is made to the
CAMERA connector (26 pins).
0: The REC command is acknowledged regardless of the VTR mode.
1: The REC command is acknowledged only when the REC PAUSE mode
is established.
128
BATT WARNING
0000
0001
AUTO
MANUAL
For setting the voltage at which a warning is given when the battery is
nearly discharged.
0: The voltage is set by the battery which was set in setup menu item No.
113 (BATTERY SEL).
AU-BP402 : 11.4 V
BP-H90 :
11.0 V
BP-H100 :
11.6 V
HP-90 :
12.0 V
HP-90A :
11.4 V
1: The voltage setting can be changed to match the battery used. The
change made to the setting is saved.
Press the MODE button, and change the setting using the “00: BATT
NEAR END” menu.
129
BATT DISPLAY
0000
0001
OFF
ON
For setting whether to display the battery voltage on the status display
window when the METER button is pressed.
0: The voltage is not displayed in the status display window.
1: The voltage is displayed in the status display window.
O
Example of display shown: 11.2 V
00
BATT NEAR
END
10.7
14.0
10.7V
14.0V
For changing in 0.1 V increments the voltage setting at which a warning is
given when the battery is nearly discharged to match the battery used.
O
Initial voltage setting:
AU-BP402 : 11.2 V
BP-H90 :
10.9 V
BP-H100 :
11.6 V
HP-90 :
12.0 V
HP-90A :
11.4 V
