Panasonic AGHPG20 - P2 GEAR PLAY/REC, Руководство по эксплуатации

Страница: 100 / 120

List of setting menus (continued)
The underlined settings are the factory mode settings.
100
AV OUT SETUP screen (continued)
Item Description of settings
UMID REC This is used to set whether to record UMID information.
ON:
Record
OFF:
Not record
UMID GEN This is used to set the creation method of UMID information to be recorded when the
setting menu “UMID REC” is set to “ON”.
INT:
The newly created UMID information is always recorded.
EXT:
The UMID information superimposed onto the input signals is always recorded.
The newly created UMID information is recorded when the information is not
superimposed onto the input signal.
UMID POS This is used to set the line on which the UMID information is superimposed.
BLANK
1L
I
1L
I
1L
<Note>
You cannot select the same line as the lines for “VITC POS-1”, “VITC POS-2” on
the “TIMECODE SETUP” screen.
When playing back the native clip in DVCPRO HD format, UMID has NO-INFO.
•
•