14 (E)
Hold down the white button and turn the
POWER lever to the OFF position.
The power is now turned off, and the CAMERA
lamp goes off.
2
Disconnect the DC cord from the DC input
socket.
OFF
ON MODE
POWER
CAMERA
VCR
Turning off the power
Disconnecting the power cord
3
Disconnect the DC cord and AC cord from
the AC adapter.
1
Disconnect the AC cord from the power
outlet.
3
3
1
2
Checking the system operations
(cont.)
Removing the tape
1
Slide the OPEN/EJECT lever in the direction
of the arrow, and open the cassette cover.
When the cover is fully opened, the cassette
holder pops out automatically.
2
Take out the cassette tape.
3
Press the part marked “PUSH” and close the
cassette holder.
4
Close the cassette cover after the cassette
holder has been completely retracted.
2
OPEN/EJECT
1
3
4
O
Check that the camera-recorder’s power is
on before sliding the OPEN/EJECT lever.
O
Close the cassette cover if you are not
going to insert a cassette tape immediately
after removing another.
O
Do not attempt to remove a tape while you
are recording. The cassette cover opens
but recording will continue, allowing outside
light and dust to adversely affect the tape.
