Others
116
VQT1F36
Problem
Check points
Auto focus function does
not work.
≥
Is manual focus mode selected?
#
Set the AUTO/MANUAL/FOCUS switch to AUTO.
≥
Are you trying to record a scene which is hard to bring into focus in
auto focus mode?
#
There are some recording subjects and surroundings for which
the auto focus does not operate correctly. (
124) If so, use the
manual focus mode to adjust the focus. (
Recorded still pictures
are not clear.
≥
Are you trying to record small or finely detailed objects with
[PICT. QUALITY] set at [
]?
#
If you try to record small or finely detailed objects with
[PICT. QUALITY] set at [
], the images may break up into a
mosaic-like pattern. Record with [PICT. QUALITY] set at [
]
instead. (
Sound is not played back
from the built-in speaker
of this unit.
≥
Is the volume too low?
#
During playback, move the volume lever to display the volume
indication and adjust it. (
Sound is played back
from one side of
speakers when motion
pictures recorded on this
unit are played back on
another device.
≥
The internal microphones of this unit record sound with Dolby Digital
5.1 Creator. When the sound is played back on another device, if
stereo 2 channel speakers on TV are used, the sound may be
played back from one side of the speakers.
When the TV has surround sound effect function, we recommend
using it.
Refer to the operating instructions of the TV for how to operate the
surround sound effect.
Although this unit is
correctly connected to a
TV, images cannot be
seen.
The images are squeezed
horizontally.
≥
Does the input switch on the TV match the connected terminal?
#
Please read the operating instructions of your TV and select the
channel that matches the input used for the connection.
≥
Is the [TV ASPECT] setting correct?
#
Change the setting to match the aspect ratio of the TV.
Press the MENU button, then select [SETUP]
#
[TV ASPECT]
#
[16:9]
or
[4:3] and press the cursor button.
≥
Are the HDMI and component cables connected to the unit while in
recording or PC connection mode?
#
If both HDMI and component cables are to be connected, set the
unit to playback mode.
VQT1F36_ENG_PP.book 116 ページ ２００７年２月２６日 月曜日 午前１１時２９分
