Panasonic AG-HPD24P страница 31 Скачать руководство пользователя

Страница: 31 / 98

Main Mode: Thumbnail Screen

in
Mod

data is not checked.

To disable verify, set the STORAGE - SETUP - VERIFY menu

setting to OFF.

When exporting to a FAT volume, verify is not performed

regardless of this setting.

• To interrupt exporting, press the SET button, select YES in the

CANCEL confirmation that appears and press the SET button

again.

• Data copied from a P2 card will not be affected if processing

should be interrupted during verification.

• When the network and drive assignments on a computer conflict

and a partition cannot be seen, use our drive mount converter

available free of charge from our web site. This allows you to

mount the specified folder when a storage device is connected

to a Windows PC.

Use the following steps to copy selected clips rather than

entire cards to a storage device.

Connect a Storage Device.

Open the thumbnail screen and use the Up/Down/

Left/Right cursor buttons to select the clips you want

to copy and press the SET button.

You can also select multiple clips.

Press the MENU button.

Use the Up/Down/Left/Right cursor buttons to

choose the OPERATION - COPY - STORAGE menu

setting and press the SET button.

Select the destination of the copied clip in the storage

device folder or partition list that appears and press

the SET button.

◆

NOTE:

• A storage device in the FAT format will display the following

folders.

- Root folder

- Up to three levels of folders containing CONTENTS folder

• Copying is not possible on a TYPE S storage device without a

single partition. To enable copying, format using a FAT format or

use EXPORT to create a partition.

Select YES in the confirmation message that

appears and press the SET button.

The clip will now be copied. A progress bar appears during

copying.

When the copy operation ends, “COPY COMPLETED!”

appears.

◆

NOTE:

• To interrupt copying, use the Up/Down/Left/Right cursor buttons

to choose CANCEL and press the SET button. Then select YES

in the CANCEL confirmation that appears and press the SET

button again. The incomplete copy at the destination is deleted.

• When a clip is copied to a TYPE S storage device, it will not be

possible to import data by card to that partition. The card model

number is then displayed as “UNKNOWN”.

Press the SET button to complete the operation.

Use the steps below to display storage device information,

select display of storage device partition and folder

thumbnails and select the partition and folder to work on

(open the EXPLORE screen).

Copying clips to a storage device

2,4,5,6

2,4,5,6,7

Viewing storage device information
(EXPLORE screen)

Содержание AG-HPD24P



































































































Результаты поиска

Содержание AG-HPD24P

Отзывы:

Похожие инструкции для AG-HPD24P

Бренды по названию

Популярные бренды

Panasonic AG-HPD24P, Руководство по эксплуатации

Результаты поиска

Содержание AG-HPD24P

Отзывы:

Похожие инструкции для AG-HPD24P

Бренды по названию

Популярные бренды