Panasonic AG-HMX100, Руководство по эксплуатации

Страница: 27 / 37

27
Chapter
4 Oper
ating En
vironment Setting
Setting [MEMORY]
This section describes the method of allocating memory
for internal video and titles separately. The memory is
used to save the internal video created from input video
(

page Vol.1-30) and title keys (

page 8).
The [MEMORY] submenu of the [SETUP] menu is used.

NOTE
If the memory settings are changed in this submenu, all data
saved in the memory is cleared.
Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5
0-30
(480/59i)
0-30
(576/50i)
0-14
(720p)
0-6
(1080i)
0-30
(480/59i)
0-30
(576/50i)
0-14
(720p)
0-6
(1080i)
MEMORY
30
INT V
0
TITLE
1
Set [INT V] (internal video memory size) using
the rotary 2 control and [TITLE] using the rotary
3 control, respectively.
The total memory size (number of frames) varies
with the video format (

page Vol.1-26). When the
size of either internal video memory or title memory
is increased, the other may be automatically
decreased to prevent the sum of the two values from
exceeding the total memory size.
If the [INT V] or [TITLE] value is changed, * appears
under [INT V] or [TITLE], respectively.
2
Press the key with * displayed.
The message [OK?] appears.
3
Press the key again to fix the change.
To cancel the change, press the key while
holding down the SHIFT key.
If other menu screen is displayed when * is being
displayed, the settings return to the previous values
without being updated.
The factory default settings are as shown below.
Video Format [INT V] [TITLE]
1080/59i 3 3
1080/50i 3 3
720/59p 7 7
720/50p 7 7
480/59i 15 15
576/50i 15 15
Setting the Audio Level
[AUDIO LEVEL]
The audio level is indicated by the audio level meter on the
setting screen (

page Vol.1-20).
The [AUDIO LEVEL] submenu of the [SETUP] menu is used
to make the settings for the audio level.
Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5
-3dB
0dB
4dB
18dB
20dB
LEVEL
ALIGN. AUDIO
0dB 20dB
HEAD
AG-HMX100P
Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5
-3dB
0dB
4dB
18dB
20dB
LEVEL
ALIGN. AUDIO
0dB 18dB
HEAD
AG-HMX100E
Set [ALIGN.] to [−3dB], [0dB] or [4dB] using the rotary 2
control.
The factory default setting is [0dB]
Set [HEAD] (head room) to [18dB] or [20dB] using the
rotary 5 control.
The factory default setting is [20dB] (AG-HMX100P) or
[18dB] (AG-HMX100E).
When the head room value is changed, the reference mark
of the audio level meter (
 page Vol.1-20) is also changed
on the Setting screen.