15
Chapter
1 Applying Eff
ects to
Video and Sound
[TIME EFFECTS]
The still, strobe, or multi-strobe effect can be set.
Still:
Keeps the video still.
Strobe:
Plays video frame by frame.
Multi-strobe:
Divides the screen into 4, 9, or 16 screens
and displays the strobe image on each divided screen.
The following diagram shows an example of the multi-
strobe effect.
Multi-strobe effect (16 screens)
The still effect can be executed by pressing the A/PROG
bus (or B/PRESET bus) STILL button.
The strobe effect can be executed by pressing the A/PROG
bus (or B/PRESET bus) STROBE button.
When the STILL or STROBE button is pressed to turn on,
the [VIDEO EFFECTS] menu appears (
page 13).
NOTE
When the STILL or STROBE button is pressed to execute the
effect, the video effects set in the VIDEO EFFECTS menu are
also executed at the same time.
Rotary 1
Rotary 2
Rotary 3
Rotary 4
Rotary 5
OFF
STILL
STROBE
FIELD
FRAME
1
@ 4
@ 9
@ 16
R 4
R 9
R 16
MANUAL
2-124
TIME
OFF
EFFECTS
2
SCREEN
FLEID
TIME
1
Select [STILL] or [STROBE] using the rotary 2 control.
Select [OFF] to apply no effect.
When [OFF] is selected, both the STILL and STROBE
execution buttons are also set to off (turned off).
If [STILL] is selected
Rotary 1
Rotary 2
Rotary 3
Rotary 4
Rotary 5
FIELD
FRAME
TIME
STILL
EFFECTS
FIELD
Select [FIELD] or [FRAME] using the rotary 3 control.
The factory default setting is [FIELD].
If [STROBE] is selected
Rotary 1
Rotary 2
Rotary 3
Rotary 4
Rotary 5
FIELD
FRAME
1
@ 4
@ 9
@ 16
R 4
R 9
R 16
MANUAL
2-124
TIME
STROBE
EFFECTS
2
SCREEN
FIELD
TIME
1
Select [FIELD] or [FRAME] using the rotary 3 control.
The factory default setting is [FIELD].
Set [SCREEN] (number of strobe screens) and the repeat
count using the rotary 4 control.
The factory default setting is 1.
A numeric value such as [@ 4] is set to specify the number
of screens into which the screen is divided for strobe image
display.
When @ is given to a numeric value:
The strobe image
is sequentially displayed only once on each of the
screens divided according to the value.
When R is given:
It is repeated to sequentially display the
strobe image on each of the screens divided according
to the value.
Set [TIME] (strobe duration) in the range of [2] to [124]
using the rotary 5 control.
Time can be changed in 2 steps.
The factory default setting is [20].
When [TIME] is set to [MANUAL], the screen can be
stopped by pressing the A/PROG bus STROBE button or B/
PRESET bus STROBE button while holding down the SHIFT
key.
This time setting is applied to Nos. 1062, 1063, 1064, and
1065 (215, 216, 217, and 218) transition patterns.
NOTE
When any of the following patterns is selected, only one
•
choice can be made from SOFT, BORDER, and SOFT
BORDER for multi-strobe and pattern edge. The effect
selected last has priority, and the previously selected effect
is canceled.
Nos. 1541 to 1550 (32 to 35, 130 to 133, and 141 to 142)
Nos. 3304, 3314, and 3324
Either strobe or still can be selected. Whichever is selected
•
later has priority and the other selected earlier is canceled.
Either multi-strobe or scene grabber can be selected.
•
Whichever is selected later has priority and the other
selected earlier is canceled.
The multi-strobe effect cannot be enabled for both A/PROG
•
and B/PRESET at the same time. The setting made last has
priority and the other made earlier is disabled.
When the still or strobe (including multi-strobe) effect is
•
activated, selecting a two-dimensionally compressed pattern
cancels the still or strobe effect. When a two-dimensionally
compressed pattern is selected, applying the still or strobe
effect changes the pattern being used to the MIX(56) pattern.
