86
Setup menu list
SCENE FILE screen
Item
Display
mode
Description of settings
CARD READ/
WRITE
(Camera)
Reads and writes scene files on the SD Memory Card.
READ:
Reads scene files (all scenes, F1 to F6) saved on the SD Memory Card
after setting values are selected.
WRITE:
Saves current scene file setting values (for all scenes, F1 to F6) on the
SD Memory Card.
NO:
Returns to the last screen.
LOAD/SAVE/
INIT
(Camera)
LOAD:
Loads the scene file settings which is saved by this camera.
SAVE:
Saves the changed scene file settings.
INITIALIZE:
The settings of the scene file selected with the SCENE FILE dial
are returned to the factory settings.
NO:
Returns to the last screen.
SYNCRO
SCAN
(Camera)
Adjusts the synchro scan shutter speed used for shooting images on a TV
screen, etc.
Holding the Operation lever toward the or will cause the values to change at
a faster rate.
50P/50i:
1/50.0 … 1/248.9 (Factory default setting is 1/48.0.)
25P:
1/25.0 … 1/48.0 … 1/248.9
•
•
DETAIL LEVEL (Camera)
Adjusts the level of the image outline correction (in the horizontal and vertical
directions).
- 7…0…+ 7
V DETAIL
LEVEL
(Camera)
Adjusts the level of outline correction in the vertical direction.
- 7…0…+ 7
DETAIL
CORING
(Camera)
Adjusts the level of noise reduction of the detail signal.
- 7…0…+ 7
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.
CHROMA
LEVEL
(Camera)
Adjusts the chroma level.
- 7…0…+ 7
CHROMA
PHASE
(Camera)
Makes fine adjustments to the chroma phase.
- 7…0…+ 7
COLOR TEMP
Ach
(Camera)
Makes fine adjustments to the color temperature (after white balance Ach
adjustment).
- 7…0…+ 7
COLOR TEMP
Bch
(Camera)
Makes fine adjustments to the color temperature (after white balance Bch
adjustment).
- 7…0…+ 7
MASTER PED
(Camera)
Adjusts the master pedestal (black level of the image) as the basis for images.
- 100…0…+ 100
A.IRIS LEVEL
(Camera)
Sets the desired AUTO IRIS level.
- 10…0…+ 10
indicates the factory setting.
