INF-20
5-4-5. Display of ZOOM MOTOR operation number of times(CAM(C) section)
Getting information of operation number of times and setting ZOOM MOTOR operation number of times are
possible.
< Display of operation number of times >
1. Clicking
“Get”
button, total operation number of times is displayed in the window.
2. Clicking
“Clear”
button, the display is cleared. The number of time information of camera recorder is not
cleared.
3. The operation number of times can be confirmed also with the ADJUST menu. Please refer to item
“4-1-5.
Display of ZOOM MOTOR operation number of times”
(page INF-10).
< Setting of operation number of times >
1. The numerical value(number of times) that wants to be set can be set to the input window. Clicking
“Set”
button, the following massage is displayed.
NOTE:
The operation number of times can be set only by 100 units.
2. When the power supply (DC power supply) on the AC adaptor side is OFF and ON, the setting time is written in
the camera recorder.
3. Clicking
“Clear”
button.
4. Click
“Get”
button to confirm that the setting time is displayed.
NOTE:
When replacing ZOOM MOTOR unit, set 0 times.
Click the
“Get”
button
Click the
“Clear”
button
Input window
Click the
“Set”
button
Clicking
“Reset”
button, display information
of input window is cleared, but information
in camera recorder is not reset.
Clicking
“Copy”
button, the getting
information numbers is copied to
input window for the setting.
Click the
“OK”
button
Click the
“Set”
button
Click the
“Clear”
button
