17
(ENG) SQT1045
∫
About batteries that you can use with this unit (as of August 2015)
The battery that can be used with this unit is VW-VBD58.
Charging the battery
Important:
≥
Do not use the AC cable with any other equipment as it is designed only for this unit. Also,
do not use the AC cable from other equipment with this unit.
≥
It is recommended to charge the battery in a temperature between 10
o
C and 30
o
C.
(The battery temperature should also be the same.)
≥
Insert the plugs as far as they will go.
1
Connect the AC cable to the battery charger and the AC outlet.
2
Insert the battery into the battery charger by aligning the arrows.
Power supply
It has been found that counterfeit battery packs which look very similar to the genuine
product are made available to purchase in some markets. Some of these battery packs
are not adequately protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these battery packs may lead to
fire or explosion. Please be advised that we are not liable for any accident or failure
occurring as a result of use of a counterfeit battery pack. To ensure that safe products are
used we would recommend that a genuine Panasonic battery pack is used.
When this unit is purchased, the battery is not charged. Charge the battery fully before
using this unit for the first time.
Charging lamp [CHARGE]
A
Lights up:
Charging (Battery charging time:
Goes off:
Charging completed
Flashing:
Be sure to connect the unit correctly (
Power lamp [POWER]
B
≥
This will light up when the AC cable is
connected.
