27
(ENG) SQT1045
When recording to the SD card with this unit, set [OUTPUT BITS] to [4:2:2(8bit)].
When recording with an external device connected via the HDMI OUT/SDI OUT terminal, you can
change the picture quality of images output to the device by changing the [OUTPUT BITS] setting.
Select the menu. (
≥
When [4:2:2(10bit)] is selected,
and
are displayed on the screen.
≥
The setting method of the picture quality of the image changes depending on the [OUTPUT BITS] setting.
j
When [4:2:2(10bit)] is selected, change the [OUTPUT FORMAT] setting.
j
When [4:2:2(8bit)] is selected, change the [REC MODE] and [REC FORMAT] setting.
≥
Please refer to “Operating Instructions Vol.2” (PDF file) for more information about [OUTPUT
FORMAT] and [REC FORMAT].
≥
This function is not available in the following cases:
j
During Freeze Frame
j
In Variable Frame Rate Mode
≥
The following menu items are not available when [4:2:2(10bit)] is selected:
j
[VFR MODE]
j
[REC MODE]
j
[REC FORMAT]
j
[SUB REC BUTTON]
j
[2 SLOTS FUNC.]
j
[DUAL CODEC REC]
j
[INTERVAL REC]
j
[PRE-REC]
j
[TIME STAMP]
j
[DOWN CONV.]
j
[VIDEO OUT OSD]
j
[MEDIA SELECT]
j
[MEDIA STATUS]
≥
The following functions are not available when [4:2:2(10bit)] is selected:
j
[DIGITAL ZOOM]
j
[REC CHECK]
j
[LAST SCN DEL]
Formatting media
If you use the SD cards for the first time for recording with this unit, format the cards.
Please be aware that if a medium is formatted, then all the data recorded on the medium will be
erased and cannot be restored. Back up important data on a PC etc.
≥
When using two SD cards, format both SD cards.
Recording
Selecting the Recording Method
: [SYSTEM MODE]
#
[OUTPUT BITS]
#
desired setting
[4:2:2(10bit)]:
Allows you to output high quality images using an HDMI/SDI connection.
This setting is suitable for recording with an external device that supports
HDMI/SDI output. You cannot record these images with this unit.
[4:2:2(8bit)]:
Allows you to output the image being recorded with this unit.
MENU
4:2:2 10bit
REC
