Panasonic AG-DVC30P, Руководство по обслуживанию

Страница: 135 / 413

INF-4
2. MAINTENANCE
Maintenance is done by periodically performing suitable maintenance servicing in order to maintain the best
condition, so that the user can use the equipment safely. Video equipment with mounted mechanisms have parts
which will wear, and their wear and deterioration cause troubles. Dust and dirt also can impair stable operation. For
this reason it is important not to just perform repair at the time of trouble, but also to perform suitable maintenance
at regular intervals.
The maintenance schedule requires replacement of mechanism unit, which contains a cylinder unit and so on.
2-1. Maintenance Schedule
No. Part Name Part No. Cleaning Replacement Remark
--- Tape Transport Part ------ 100 hours ------ *1
1 Mechanism Chassis Unit VXY1843 ------ Every 2000 hours *2
Note:
Hours of use are based on the head rotation hours. (Head rotation hours can be confirm on item DRUM RUN in
DIAGNOSTIC menu.)
Hours of use are recommendation. It may depend on temperature, humidity, quality of tape or dust condition.
Hours of use are listed as the reference of maintenance. They do not mean guarantee hours.
HOUR METER can be reset on ADJUST menu (Refer to item “5-2-4. Hour Meter Reset and LOG clear” in this
section.)
*1. Tape Transport part is cleaned by cleaning liquid.
*2. Please refer to the most recent execution outline, as the maintenance specifications and the part numbers may
change.
2-2. Cleaning of Tape Transport Part
Please clean the below indicated tape transport parts with cleaning liquid when needed.
(Tension Post, S1 Post, Cylinder & Heads, T1 Post, T2 Post, T3 Post, Capstan Shaft and Pinch Roller)
T2 Post T1 Post
T3 Post
Capstan Shaft
Pinch Roller
S1 Post
Tension Post
S2 Post
Cylinder
LOADING condition
When cleaning the
post, wrap a cloth on a
pick. Wipe each post
with a cloth dipped in
cleaning liquid. And
wipe it again with dry
cloth.
Thin
stick
Upper Cylinder
Head
Lead
Do not forget cleaning
the upper Cylinder,
Head, tape transport
part of Lower Cylinder
and Lead, when
cleaning the Cylinder.
Lower Cylinder