Bef
ore Use
-English-
9
Supplying Power
Charge the Battery Pack on
the AC Adaptor
1
Connect and plug in the Power Cord
as shown.
• POWER Lamp will light.
• Remove the DC Cable, if attached,
from the adaptor.
2
Attach the Battery as shown
to
charge.
• CHARGE Lamp lights up. It goes out
when charging is complete (approx.
1 hour). Expect approx. 2 hours (LCD
monitor is closed.) of operation when
fully charged.
3
Remove the Battery.
Slide the Battery
out and then lift up.
About the Flashing of the CHARGE Lamp
• Charge the Battery within an ambient temperature range of 10 °C and 30 °C.
• If charging is done in extreme low or high temperatures, Battery charge time increases.
CHARGE Lamp flashes when...
•
The Battery is being charged, but charging is taking longer than normal.
• Charging is not possible. Remove the Battery once, wait a short time, then re-attach it
for charging.
Note
1
Insert the Battery Pack
and slide it
down until it locks with a click.
Remove the Battery Pack
1
Remove the Battery Pack
and slide
the Battery upward while pushing the
BATT RELEASE
.
2
BATT RELEASE
Insert the Battery Pack
1
1
2
POWER Lamp
CHARGE Lamp
DV1DC.Eng9-12.p65
2003/02/28, 17:02
9
