Recor
ding Features
-English-
23
Recording Features
1
Insert a pre-recorded tape
into the source (playing) VCR and a
blank tape with recorded tab closed in
place into this unit.
2
Press MENU
to display MAIN MENU
screen.
3
Press +/–
to select
REC MODE
, then
press SET
to display the REC MODE
menu screen.
4
Press +/–
to select
AV JACK
, then
press SET
to select IN.
5
Press +/–
to select
AUDIO SEL
, then
press SET
to select LINE.
• Press MENU twice to exit.
• “LINE AV IN” is displayed on the LCD
monitor. (p. 32)
6
Press PLAY
on the VCR. When
the tape reaches the point from which
you want to start dubbing,
press
PAUSE
.
7
First place this unit to play pause
mode, and then press (REC)
for rec
pause mode.
8
Simultaneously, press (PAUSE)
on
both units to begin copying.
9
Press (STOP) on both units
when
copying is completed.
Before you begin
• Connect this unit and VCR to their
power sources.
• Connect this unit to a VCR as
illustrated left.
• Turn both units on.
• Before using S-VIDEO Connector,
insert the DC Cable into the DC IN
Terminal. (p. 10)
CAUTION:
Unauthorised exchanging and/or
copying of copyrighted recordings may
be copyright infringement.
Video Out
S-Video Out
VHF Connecting
Cable (not
supplied)
TV
(To View)
A/V Cable
(Supplied)
To Audio Out
To Video Out
Source (Playing)
VCR (Rear)
To S-Video Out
(If there is S-Video Out)
S-VIDEO
IN
Recording unit
S-Video
Cable (not
supplied)
Audio Out
Copying S-VHS or VHS
Cassette to your Tapes
• Do not connect A/V with S-Video on a
different unit. The picture and sound may
be abnormal.
• If both S-Video Cable and A/V Cable are
used, the picture will come from the
S-Video Cable.
• Do not connect the A/V Cable and
S-Video Cable to other devices.
• If a recording is made by the VCR while
the counter is displayed, it cannot be
reset.
• Depending on the input signal, the closed
caption signal may not be able to be
recorded normally.
Note
A/V IN
DC Cable
(Supplied)
DV1DC.Eng22-24.p65
2003/02/28, 17:02
23
