Panasonic AG-AC120ENU Скачать руководство пользователя

Страница: 88 / 106

[AV OUT SETUP] screen

Item

Display

mode

Description of settings

[HDMI OUT

SEL]

<CAMERA>

<PB>

(AVCHD

mode only)

Sets the video format of the <HDMI> output.

[1080i/720P]:

Outputs at the resolution set in [REC FORMAT].

[DOWN CONV]:

<HDMI> is output at 480P.

[DOWNCON

MODE]

<CAMERA>

<PB>

(AVCHD

mode only)

Switches down-conversion output mode.

[SIDE CROP]:

Crops the left and right edges. Images output from the

external output terminals <VIDEO OUT>, <HDMI> will have

portions which extend beyond the edges of the screen and

cannot be seen.

[LETTER BOX]:

Adds black bands at the top and bottom of the image.

[SQUEEZE]:

Squeezes images horizontally.

[HP MODE]

<CAMERA>

Selects the sound heard from the headphones.

[LIVE]:

The sound input from the microphone is output as is. This

setting is selected when delays in the sound are annoying.

[RECORDING]:

The sound in the status to be recorded (the sound

synchronized with the images) is output.

[TEST TONE]

<CAMERA>

Sets test tone output to channels 1 and 2 when BARS setting is ON.

[LEVEL1]:

Outputs the 1 kHz test tone.

[LEVEL2]:

Test tone is output at lower volume than LEVEL1.

[OFF]:

Does not output the test tone.

[VIDEO

SETUP]

<CAMERA>

<PB>

Sets the setup level of video signals.

[0%]:

<VIDEO OUT> terminal output and recording setup levels

will both be set to 0%.

[7.5%A]:

<VIDEO OUT> terminal output setup level will be set to

7.5%, while recording setup level will be set to 0%.

[AUDIO OUT]

<CAMERA>

<PB>

Sets the audio signals to output from the <AUDIO OUT> terminal (A/V OUT).

[CH1/CH2]:

CH1 terminal = CH1 signals, CH2 terminal = CH2 signals

[CH1]:

CH1 terminal = CH1 signals, CH2 terminal = CH1 signals

[CH2]:

CH1 terminal = CH2 signals, CH2 terminal = CH2 signals

•

When a memory card containing 5.1 channel content recorded on another

equipment is played back on the camera, it is down-mixed to 2 channels when

output through the <AUDIO OUT> and headphone terminals.

is the factory default mode.

Содержание AG-AC120ENU











































































































Результаты поиска

Содержание AG-AC120ENU

Отзывы:

Похожие инструкции для AG-AC120ENU

Бренды по названию

Популярные бренды

Panasonic AG-AC120ENU, Руководство по эксплуатации

Результаты поиска

Содержание AG-AC120ENU

Отзывы:

Похожие инструкции для AG-AC120ENU

Бренды по названию

Популярные бренды