Panasonic AG-AC120ENU Скачать руководство пользователя

Страница: 85 / 106

Menu

[RECORDING SETUP] screen

Item

Display

mode

Description of settings

[HD/SD MODE] <CAMERA>

Switches the mode AVCHD/DV.

[AVCHD], [DV]

•

If the [TURN POWER OFF] message is displayed, switch the camera OFF

and then ON again. Switching the camera ON/OFF switches the mode.

[REC FORMAT] <CAMERA>

AVCHD mode

Selects the recording format. (Page 14)

•

[PH 1080/24P] and [PH 720/24P] are for native recording.

[PH 1080/60i], [PH 1080/30P], [PH 1080/24P],

[PH 720/60P], [PH 720/30P], [PH 720/24P], [PM 720/60P], [HA 1080/60i], [HE

1080/60i]

DV mode

Selects the recording format. (Page 14)

[DV 480/60i], [DV 480/30P], [DV 480/24P]

[ASPECT

CONV]

<CAMERA>

(DV mode

only)

Selects aspect ratio for DV mode recording.

[SIDE CROP]:

Records in 4:3. Crops the left and right edges.

[LETTER BOX]:

Records in 16:9. Adds black bands at the top and bottom of

the screen.

[SQUEEZE]:

Records with horizontal compression of picture.

[PREREC

MODE]

<CAMERA>

Sets the pre recording to ON or OFF.

[ON]:

Enables the pre-rec function.

[OFF]:

Disables the pre-rec function.

•

[TCG] is set to [FREE RUN].

•

The INTERVAL REC setting will be released.

[SIMUL REC]

<CAMERA>

Records the same images to both memory card slots. (Page 32)

[ON]:

Enables the simul recording.

[OFF]:

Enables the normal recording.

[RELAY REC]

<CAMERA> [ON]:

Enables the relay recording. When the memory card used for

recording has no remaining space, recording continues on another

memory card if the memory card that can be used for recording is

inserted in another memory card slot.

[OFF]:

Relay recording is not performed. Recording stops when the selected

memory card has no remaining space.

is the factory default mode.

Содержание AG-AC120ENU











































































































Результаты поиска

Содержание AG-AC120ENU

Отзывы:

Похожие инструкции для AG-AC120ENU

Бренды по названию

Популярные бренды

Panasonic AG-AC120ENU, Руководство по эксплуатации

Результаты поиска

Содержание AG-AC120ENU

Отзывы:

Похожие инструкции для AG-AC120ENU

Бренды по названию

Популярные бренды