manualshive.com logo in svg

Panasonic AFP7CPS31, Руководство пользователя

Поделиться
Скачать
Panasonic AFP7CPS31 Скачать руководство пользователя страница 29

3.3

 

Mount Allocation Using FPWIN GR7

 

3-7

 

 

3.3  Mount Allocation Using FPWIN GR7 

3.3.1  Mount Registration of a Unit to be Used and the Starting Word Number 

 

What is mount registration? 

If all units to be used are physically at hand, you can connect FPWIN GR7 online to the FP7 
CPU unit, read the actual mount status, and complete registration. 

 

Allocation method 

Mount registration of the unit to be used and the initial I/O number are set in the following 
procedure. 

PROCEDURE

 

1.  From the menu bar, select "Online" 

 "Online Editing". 

The screen is switched to the “Online Editing” mode. 

2. Select 

"Option" 

 "FP7 Configuration". 

3.  In the relevant field, select "I/O Map". 

The "I/O Map" dialog box is displayed. 

4.  Press the [Mount Registration] button. 

The mount status is read, and the read I/O map is registered in the CPU unit.  

KEY POINTS

 

 

Following the mount registration operation, the system automatically reads 
the unit attachment status, formulates an I/O map, and enters the initial 
word number.  

 

The I/O map that has been mount-registered using FPWIN GR7 is registered 
into the CPU unit, together with other project information. If a difference 
with the actual units and/or attachment status is identified when power 
supply is turned on or during operation, such a difference is reported as a 
self-diagnosis error. 

 

If a starting word number is not entered, the system automatically enters 
one. 

 

Based on the starting word number allocated to each unit, I/O numbers are 
allocated. 

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Содержание AFP7CPS31














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды