Panasonic AFP7CPS Series, Руководство пользователя

Страница: 56 / 79

General-Purpose Communication
6.2.3 GPSEND (General-Purpose Communication Sending Instruction)

Instruction format
Items Settings Setting range
i Specify the operation unit. US / SS (Note 1)
S Specify the header of the source node data area. (Note 2)
n Specify the No. of sent bytes.
1 to 4094, -1 to -4096
(Note 1) (Note 3)
D
Specify the device area in the source node to save the execution
result (one word).
(Note 4)
(Note 1) When a K constant (integer with a symbol) is specified for the No. of sent bytes [n], select SS for operation
unit [i]. When a U constant (integer without a symbol) or an H constant (hexadecimal integer), select US for
operation unit [i].
(Note 2): Device that can be specified for S are: WX, WY, WR, WL, DT, LD.
(Note 3) If a negative value is specified, the end code is not automatically added to the sent data. (Where SCU is
targeted)
(Note 4): Device that can be specified for D are: WX, WY, WR, WL, DT, LD.
Once the sending process is completed, the sent bytes are saved. When an error occurs, "FFFFH" is saved.
KEY POINTS

Specify the port targeted for communication, using UNITSEL instruction
immediately before GPSEND instruction.

Maintain the ON conditions for GPSEND instruction until sending is
completed and the general-purpose communication sending active flag (Y8)
turns OFF.

Confirm that the "General-purpose communication Clear to send flag" for
the targeted COM port has turned ON, and execute GPSEND instruction.

When GPSEND instruction is executed for a communication port in the
sending process, the sending active flag and the sending result are updated.

GPSEND instruction cannot be used in an interrupt program.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com