Panasonic AFP7CPS Series, Руководство пользователя

Страница: 35 / 79

4.3 Example of User connection (MEWTOCOL)
KEY POINTS

Connection request will be performed when data transfer is executed.
Please execute master communication command after confirming the
connection status flag (X30) is OFF. When a connection successfully
established, connection status flag (X30) turns ON. If a connection failed,
connection status flag (X30) stays OFF and TCP client connection failure
flag (X32) turns ON. Please reconfirm the conditions of destination or
connection.

If it needs to continue data transfer between the same connected
equipment , please execute master communication command after
confirming the connection status flag (X30) is ON.

Timeout value of respons reception for AFP7CCET1 is the same as
connection termination timeout during no communication. Set the timeout
of SEND/RECV instruction longer than the timeout during no
communication to judge the timeout of response reception. Enter the "Time
setting" filed of "CPU Configuration" in the "FP7 configuration" dialig box
of FPWIN GR7.

UDP Client mode
Parameter Default
Protocol Mode UDP
Action Mode Client Mode
Communication
Mode
MEWTOCOL
Send type
UNICAST
/BROADCAST
(Note1)
Destination IP
Address
192.168.1.100
Destination Port
No.
9094
Source Port No. 9095
Timeout 15 sec
(Note)
：
The parameter "IP Address" is not
available, if BROADCAST is selected.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com