Panametrics DigitalFlow XGF868i, Руководство по обслуживанию

Страница: 54 / 72

Appendix B. Calibration and Testing with PanaView
46 DigitalFlow™ XGF868i Service Manual
B.5.1 Uploading the Signal Array Data
By uploading XGF868i signal array data for examination, a user can check if the transducer signal is the proper
shape, and change setup parameters if necessary.
IMPORTANT: Consult with Panametrics before using this data to change any parameters.
1. In the Calibration/Test menu, double-click on the Signal Array Upload option.
2. Double-click on the desired Channel .
3. The next prompt asks for the specific Array to Load. Five choices are available:
• Raw UP (Upstream) Signal
• Raw DOWN (Downstream) Signal
• CFUNC UP (Correlation Function Upstream)
• CFUNC DOWN (Correlation Function Downstream)
• CCFUNC (Cross-Correlation Function)
Double-click on the desired array.
4. PanaView now offers two options for Uploading the array data.
• If you double-click on To Display , the right pane of the window appears similar to Figure 12 below, and the
data is available for immediate evaluation. Click [Exit Page] to close the window and return to the
Calibration/Test menu.
Figure 12: Signal Array Data Displayed on PanaView
• If you double-click on To File , another window opens similar to Figure 13 below. Enter a file name and click
[Save]. PanaView stores the array data in a Windows file, and closes the Calibration/Test window.