Panadero BERGEN, Инструкции по использованию и обслуживанию

Страница: 7 / 56

Mod.
B E R G E N
7
This model is equipped with a tangential fan (170 m3/h). It takes the air in the lower
part to circulate in the woodstove and share it out from the top part.
The fan has a thermostat to regulate the temperature. It starts to 50ºC to prevent overheating
The woodstove has an electric switch with three positions to regulate the hot air flow rate.
- In position 0, the fan is off but if the temperature reach 50ºC, the thermostat let
the fan starting, on the position I
- In position I, the fan reach 60% of the maximum speed.
- In position II, the fan reach the maximum speed.
IMPORTANT: the fan must be ALWAYS connected to the network to prevent overheat to
deterioration.
PROPERTIES OF THE FAN
Since this device has been tested in a homologated laboratory and since we check our
devices a full 100%, making sure that the electric wiring operates correctly before shipping,
the fan and the electric wiring are not covered by our warranty.
If any deformation occurs inside the combustion chamber, this is due to overheating of the
device and therefore NOT covered by the warranty.