Panacom PAN830SKHD, Инструкция по эксплуатации

Страница: 19 / 26

Enter MODE menu to enter setup menu for:
Enter Alarm setting.
5.0 MODE
6.0 ALARM
[Device_ID]:
[Door2 status]:
[Record mode]:
[Door1 unlock time]:
[Motion detection]:
[MD sensitivity]:
[Door2 unlock time]:
[Missed call]:
Indoor monitor ID number 01/02/03/04/05/06 options, “01” means
master monitor, “02-06” means slave monitor.
Switch ON if 2 doors are connected to system.
Record and snapshot mode options. If set it as record, when visitor
call from outdoor station, start to record; If set it as snapshot,
when visitor call from outdoor station, start to snapshot.
Unlock time 2-10s options, default 5s.
Door1, Door2, CAM1, CAM2, OFF options.
Motion detection sensitivity of door 1. doo2,cam1,cam2 can be
set with low, medium, high level, Low level: motion detection hard
to be activated. Medium level: motion detection easier to be activated.
High level: motion detection very easy to activated.
Unlock time 2-10s options, default 5s.
Switch on/off options. If switch on, outdoor station call monitor with no
answer, the monitor will show a mailbox icon on standby screen to show
you missed a call. This feature can only operate when using clock
mode on standby screen.
[Alarm record]:
Two type options: recording or snapshot. If Cam 1 or 2 detect alarm,
monitor start to recording or snapshot picture save in SD card.
[MD duration]:
Motion detection duration time can be set with 1~5minute.
Noted: Motion detection feature will not work when digital photo frame feature is used.
All digital photo frame pictures should be stored in folder name “user” in SD card.