Patient Position:
1) Comfortably seated 2) Legs uncrossed
3) Feet flat on the floor 4) Back and arm supported
5) Cuff and the heart are at the same level
NOTE:
This symbol - indicates that certain pulse irregularities were detected
during the measurement.
In this case, the result may deviate from your normal basal blood pressure –
repeat the measurement.
Information for the
physician
on frequent appearance of the Irregular
Heartbeat Symbol.
This instrument is an oscillometric blood pressure monitor device that also
analyzes pulse frequency during measurement. The instrument is clinically
tested.
If pulse irregularities occur during measurement, the irregular heartbeat
symbol is displayed after the measurement. If the symbol appears more
frequently (e.g. several times per week on measurements performed daily) or
if it suddenly appears more often than usual, we recommend the patient to
seek medical advice. The instrument does not replace a cardiac examination,
but serves to detect pulse irregularities at an early stage.
5.4. Irregular Heartbeat Detector
5.3. Measure Procedure
Picture-06
Refer to picture-06
The monitor is designed to take measurements and store the measurement
values in memory for only one User.
1. Sit comfortably in a chair with your feet flat on the floor.
2. Press the START/STOP button to start measurment.
Stretch your arm forward on the desk and keep relaxing, make sure the palm
of hand is upturned. Make sure your arms are in the right position and your
blood pressure monitor is directly above your arm (the monitor can't be
placed on the side of your arm, which can affect your results) and avoid body
movement. Sit still and do not talk or move during the measurement.
After the cuff has been appropriately positioned on the arm and connected
to the blood pressure monitor, the measurement can begin:
a) Operate on the device
Press the Stop/Start button as the power on. The pump begins to inflate the
cuff. After automatically reaching an individual pressure, the pump stops and
the pressure slowly falls. The device will work out the result after the
measurement is finished.
