Pan Acoustics TWM III, Инструкция по монтажу

Страница: 6 / 10

© Pan Acoustics GmbH Page 6 of 10
Manual
Doc. No
.: 2022_01588 - 16.03.2022
4. Assembly and use instructions
• The user is to observe existing safety requirements and regulations.
• The speaker accessory is not to be used for lifting, lowering or securing people or objects other
than the specifi ed speakers from the Pan Beam and Pan Speaker series.
• The “Wall bracket, horizontally rotatable (TWM III)” is rated for the assembly of speaker systems
weighing up to 13 kg.
• It is recommended to use an additional securing element to secure each suspended speaker
against falling.
• In general, a visual inspection of the speaker and the accessory is to be performed prior to each
use/assembly. If there are signs of wear, cracking or deformation, they are to be replaced
without delay. The visual inspection also includes checking the screw connections on load-
bearing parts of the speaker and accessory.
4.1. Overview of assemblies
B A
C
D
H E G F
Description Drawing
Slider 30 x 4 x 90mm A
Threaded pin, M6 x 8mm socket bolt, A2, DIN 916 B
Bracket (loudspeaker) C
Flange cap screw, M6 x 10 mm, ISO 7380, hexagon socket, pressed-on disc D
Bracket (wall) E
Axle element F
Hexagon nut, M6, DIN 985 G
Hex bold, M6 x 35mm, DIN 933 H
Half bolt with allen, M8 x 16mm 10.9 vz, ISO 7380 I
Washer, M8 J
Cap K