© Pan Acoustics GmbH
Page 4 of 10
Manual
Doc. No
.: 2022_01588 - 16.03.2022
1. Introduction
Thank you for choosing a product from Pan Acoustics.
With the purchase of this accessory for Pan Acoustics speaker systems, you have acquired a product for
safe mounting on walls.
Please read this operating manual carefully prior to startup in order to guarantee fault-free operation.
This symbol provides important instructions for the proper handling of the
product. Failure to observe this instruction may result in damage to the
product or malfunctions.
1.1. Symbols and explanation
This symbol indicates a hazard with a high level of risk. If this hazard is not
avoided, serious injury or death may result.
This symbol indicates a hazard with a medium level of risk. If this hazard is
not avoided, moderate to serious injury or death may result.
This symbol indicates a hazard with a low level of risk. Failure to observe this
instruction may result in minor injuries or damage to property.
All specifi cations in this operating manual are based on the product features available at the time of
production and the safety rules applicable at that time.
This operating manual describes the setup, function and connection of the “Wall bracket, horizontally
rotatable (TWM III)”. It is geared towards systems technicians and persons assigned the task of in-
stalling and operating the system.
Pan Acoustics reserves the right to make changes and modifi cations within the scope of legal regula-
tions and product improvements without notice.
This operating manual and all additional information required for operation must be read prior to
use by all persons involved in commissioning. The operating manual and all additional information
required must be kept within reach, near the device.
All necessary information and documents can be obtained from the Pan Acoustics website,
www.pan-acoustics.de/en/service/download
, or per email from
1.2. General information and target group
2. Product description
With the loudspeaker accessory “Wall bracket, horizontally rotatable (TWM III)”, a loudspeaker P /
PB xx from the product series: Pan Beam, Pan Speaker, Pan EVAC, Pan 2-Line and Pan AMT can be
mounted on the wall. The bracket is designed to hold a loudspeaker with a maximum weight of 13 kg.
The bracket has a horizontal speaker swivel range of +/- 45°. It also allows a vertical swivel range of
+/- 5°. Lateral mounting of the loudspeaker is also possible.
The bracket is attached to the wall with screws and dowels (not included in delivery). The bracket can
be precisely aligned on the wall using the mounting slot holes.
The bracket is designed for indoor and outdoor use.
NOTICE
CAUTION
WARNING
DANGER
