PAMI Hemming Machine 99 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 34

PAMI Hemming Machine 99 Скачать руководство пользователя страница 4

3

01 - GENERALITIES

CHARACTERISTICS AND APPLICATION

The Hemming Machine 99 can hem different types of fabric without having to alter the machine settings.

Hourly output is roughly 2100 items, which are them stacked tidily, ready for the next operation.

RECOMMENDATIONS FOR USE

The Hemming Machine 99 should be used for hemming fabrics only.

The manufacturer declines all liability for damage arising from incorrect use or any use differing from the
instructions in this manual.

The symbol appears when there is a risk or danger to the health of the operator; the maximum care
must be taken.

The machine has a sewing group with moving needles. We recommend extreme care when approaching
these parts.

Disconnect the power and the compressed air supplies before carrying out any adjustment, replacement or
maintenance work.

This machine must not be exposed to the weather (rain, direct sunlight, etc.).

WARNING !!!

The machine works with 220V single-phase!

Always press the emergency button if the thread breaks or the machine jams.

«
...
2
3
4
5
6
...
»

Содержание Hemming Machine 99



































Отзывы:

Нет отзывов