DVD Playback Operation
39
Preparation
1. Connect the unit to the power supply and press the
POWER
button to turn on the unit.
2. Press the
INPUT
button on the remote control or the
SOURCE
button on the TV set to select
DVD mode and press the OK button to enter.
3. Gently insert the disc, with the label side toward the front of the television, into the disc tray slot
until about half of the disc is in the tray and then the disc will drawn into the disc tray and
loaded automatically.
4. Press the EJECT button to eject the disc, but the disc can not be drawn into the disc tray by
pressing EJECT button again. Please push the disc until it can be drawn into the disc tray
automatically.
Warning:
Use of poor quality discs could result in damage to the television.
DVD Playback
Region Code
DVD players and discs are coded by region. These regional codes must match the played discs. If
the codes don’t match, the disc cannot be played. This player’s default code is region 4.
Play
Press the
PLAY
button to start playback.
Stop
During playback, press the
STOP
button once to stop playback and press the
PLAY
button to
resume normal playback. Press the
STOP
button twice to stop playback completely.
Pause
During playback, press the
PAUSE
button once to pause the playback; press it repeatedly to start
step-by-step playback. Press the
PLAY
button to resume normal playback.
