PaloAlto Networks PA-5400 Series, Справочник по аппаратуре

Страница: 54 / 92

54
PA-5400 SERIES NEXT-GEN FIREWALL HARDWARE REFERENCE | PA-5400 Series Firewall Installation
©
2021 Palo Alto Networks, Inc.
View PA-5400 Series Firewall Power Statistics
Use the following information to learn how to view active power statistics on a PA-5400 Series firewall to
help you ensure power redundancy and to plan for growth. You can view the amount of power that each
power supply is producing as well as the power rating for each hardware component.
This information will also help you
Determine PA-5400 Series Firewall Power Configuration Requirements .
The power numbers provided by the
show chassis power
command represent power
calculated by the firewall power management software and does not represent the exact
measured power. The difference allows margin for thermal conditions and component
aging factors. This CLI output helps you know how much power is required to prevent the
appliance from overloading under extreme conditions.
STEP 1 | Using a terminal emulator, such as PuTTY, launch an SSH session to the firewall.
Run the following command:
admin@PA-5450> show chassis power
STEP 2 | View the output for information on the status of each component and the current power
rating.
For example, the following table shows the CLI output (in table format) from a PA-5450 with three power
supplies installed. The output shows each front slot (1 to 7), the installed power supplies and fan trays, the
status of each component, the rated power consumption for each component, and the amount of power
produced by each power supply. The power supplies are labeled PS1 to PS4.
Example Power Output from a PA-5450 Firewall
Slot Component Card Status Power (w)
1 PA-5400-NC-A Up 180
2 PA-5400-NC-A Up 180
3 empty
4 PA-5400-DPC-A Up 325
5 empty
6 empty
7 PA-5400-MPC-A Up 240
FANTRAY 1 PA-5450-FAN Present 160
FANTRAY 2 PA-5450-FAN Present 160