Palmgren 9683338, Инструкция по эксплуатации и каталог запасных частей

Страница: 5 / 24

5
G
E
T
T
IN
G
S
T
A
R
T
E
D
S
A
F
E
T
Y
/
S
P
E
C
IF
IC
A
T
IO
N
S
A
S
S
E
M
B
L
Y
/
IN
S
T
A
L
L
A
T
IO
N
O
P
E
R
A
T
IO
N
T
R
O
U
B
L
E
S
H
O
O
T
IN
G
M
A
IN
T
E
N
A
N
C
E
/
R
E
P
A
IR
Know how to use your tool
The operation of any tool can result in
foreign objects being thrown into the
eyes, which can result in severe eye damage. Always wear
safety goggles complying with United States ANSI Z87.1.
before commencing power tool operation.
Think safety! Safety is a combination of operator
common sense and alertness at all times when tool
is being used.
• Use right tool for job. Do not force tool or attachment to do a
job for which it was not designed.
• Disconnect tool when changing the blade.
• Avoid accidental start-up. Make sure that the tool power
switch is in the OFF position before plugging in.
• Do not force tool. It will work most efficiently at the rate for
which it was designed.
• Keep hands away from moving parts and cutting surfaces.
• Never leave tool running unattended. Turn the power off and
do not leave tool until it comes to a complete stop.
• Do not overreach. Keep proper footing and balance.
• Never stand on tool. Serious injury could occur if tool is tipped
or if blade is unintentionally contacted.
• Know your tool. Learn the tool’s operation, application and
specific limitations.
• Use recommended accessories. Use of improper accessories
may cause risk of injury to persons.
• Handle workpiece correctly. Protect hands from possible
injury.
• Turn machine off if it jams. Blade jams when it digs too deeply
into workpiece. (Motor force keeps it stuck in the work.) Do
not remove jammed or cut off pieces until the saw is turned
off, unplugged and the blade has stopped.
• Adjust upper guide to just clear workpiece.
• Hold workpiece firmly against vise.
• DIRECTION OF FEED: Feed work into a blade or cutter
against the direction of rotation of the blade or cutter only.
SPECIFICATIONS
The saw features a solid cast iron vise to ensure durability. The
saw is equipped with a miter gauge for performing many different
operations.
Parameter 9683338
Description 14" Vertical Column Cold Saw
Blade Dimensions 14.5"
Blade thickness .07-.12 in
Arbor diameter 1.26”
Blade speed 36-72 RPM
Machine dimensions 97”x39”x74”
Base footprint 25”x39”
Machine weight 992 lbs
Miter angle range 105°
Cutting degree 45° right - 60° left
Voltage 230V
Amperage 14Amps
HP 3.3HP
Motor RPM 1400-2800
Phase 3
Max vise opening 7.25"
Vise height from floor 36"
Coolant tank capacity 2 gal.
Round Tube Cutting Capacities
@90° (Straight Cut): 4.625”
@45° Left/Right: 4.625”
@ 60° Right: 3.5”
Square Tube Cutting Capacities
@ 90° (Straight Cut): 3.875”
@ 45° Left/Right: 3.5”
@ 60° Right: 3.5”
Solid Round Cutting Capacities
@ 90° (Straight Cut): 3.875”
@ 45° Left/Right: 3.875”
@ 60° Right: 3.5”
Rectangular Tube Cutting Capacities
@ 90° (Straight Cut): 3-1/2” x 6.625”
@ 45° Left/Right: 3-1/2” x 4.875”
@60° Right: 3-1/2” x 3.5”