8
Palmgren Operating Manual & Parts List 9680149
OPERATION (CONTINUED)
MAINTENANCE
AFTER USING
After the completion of the work, the power supply should be cut off,
the machine tool and environment should be cleaned well, and
mechanical oil should be added to the exposed surface of the
machine to prevent the surface of the machine from rusting and
affecting the use and beauty of the machine.
MACHINE TOOL LUBRICATION
In order to ensure the long service life of the machine and the
effective operation of the machine tool, lubricating oil or lubricating
oil is regularly added to each moving joint and joint.
Where lubricating oil is needed is mainly the dovetail surface in three
directions of XYZ axis. Position as indicated by arrow
The main ones that need to be lubricated are XYZ's three axial thread
rods and rod nuts.
Figure 28 – Spindle removal.
Figure 27 – Spindle screw.
Figure 32 – Lubrication locations.
Figure 30 – Lubrication locations.
Figure 31 – Lubrication locations.
Figure 29 – Lubrication locations.
Figure 33 – Lubrication locations.
