2
Palmgren Operating Manual & Parts List 9680149
DESCRIPTION
Palmgren 18" Mill Drill w/ DRO and Power Feed, Model 9680149 is
for milling or drilling, widely used in different places. Fine exterior,
wide range of speed and easy to use.
Designed for industrial usage milling, drilling, reaming, steps and mill
plane with metal and other material.
• The highest speed range 5000 rpm; variable spindle speed;
• Spindle speed digital readout;
• Tapping function;
• Brush less DC motor;
• Chuck guard with safety switch;
• Feeding depth digital readout;
• Fine feeding;
• With two USB sockets, can supply power to lamp or iPad;
• Large size worktable 740 × 180mm;
• High grade aluminum hand wheel, anodic oxidation treatment of
the whole Aluminim Rod Surface;
• High grade scale ring, Surface anodic oxidation treatment.
• Small tools adsorption zone.
UNPACKING
WARNING:
Be careful not to touch overhead power lines, piping,
lighting, etc., if lifting equipment is used. Mill Drill weighs up to 170 Kg
lbs, proper tools, equipment and qualified personnel should be
employed in all phases of unpacking and installation.
Crates should be handled with care to avoid damage from dropping,
bumping, etc. Store and unpack crates with correct side up. After
uncrating Mill Drill, inspect carefully for any damage that may have
occurred during transit. Check for loose, missing or damaged parts. If
any damage or loss has occurred, claim must be filed with carrier
immediately. Check for completeness. Immediately report missing
parts to dealer.
CAUTION:
Never use highly volatile solvents. Avoid getting cleaning
solution on paint as it may tend to deteriorate these finishes. Use soap
and water on painted components.
SPECIFICATIONS
Palmgren 18" Mill Drill w/ DRO and Power Feed, Model 9680149
Max drilling capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.10"
End mill capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1"
Face mill capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.50"
Throat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.50"
Max distance spindle to table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9"
Spindle taper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.40"
Spindle speed, low range . . . . . . . . . . . . . . . . . . . . . . . . . . . 100-1800 RPM
Spindle speed, high range: . . . . . . . . . . . . . . . . . . . . . . . . . 280-5000 RPM
Motor RPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3600 RPM
Table size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30" x 7"
T-slot size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5"
Table longitudinal travel (X) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20"
Cross travel (Y) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.25"
Headstock travel (Z) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.85"
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115V
Amperage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8A
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.33 HP
Overall dimension (LxWxH) . . . . . . . . . . . . . . . . . 37.5" x 30.25" x 36.25"
Packing size (LxWxH) . . . . . . . . . . . . . . . . . . . . . . . . .43.25" x 36.25" x 39"
Weight (net/gross) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .324 lbs / 375 lbs
KNOW YOUR TOOL
Figure 1 - Know your tool.
1 Base
2 Y-axis hand wheel
3 Large size worktable
4 Fuselage (with protect
cover)
5 Power socket with fuse
6 Protective dust guard
assembly
7 Depth display
8 Fine feeding handle
9 Emergency stop switch
10 Knob with potentiometer
11 Spindle speed display
12 Tapping function button
13 Start button
14 Spindle box top cover
15 Spindle box
16 Tapping button (change to
F/R)
17 Spindle lifting lever
19 Fine feeding lock handle
20 Back mask
21 X-axis handle wheel
22 Saddle lock handle
23 Saddle
24 Worktable lock handle
25 DRO
26 Power feed
27 Up
28 Down
29 Z-feed motor
21
26
25
6
7
5
3
2
24
24
22
23
1
9
10
28
27
11
12
13
29
15
16
17
14
8
19
20
4
