M
A
IN
T
E
N
A
N
C
E
/
R
E
P
A
IR
T
R
O
U
B
L
E
S
H
O
O
T
IN
G
O
P
E
R
A
T
IO
N
A
S
S
E
M
B
L
Y
/
I
N
S
T
A
L
L
A
T
IO
N
S
A
F
E
T
Y
/
S
P
E
C
IF
IC
A
T
IO
N
S
G
E
T
T
IN
G
S
T
A
R
T
E
D
4
SAFETY RULES
Completely read and understand this
owner’s manual before assembly or tool
operation. Read and understand the warnings shown on the
machine and in this manual. Failure to comply with all of
these warnings may cause serious injury or death.
PROPOSITION 65 WARNING: Some dust created by
using power tools contain chemicals known to the state
of California to cause cancer, birth defects or other
reproductive harm.
Some Examples of these chemicals are:
•
Lead from lead-based paints
•
Crystalline silica from bricks and cement and other masonry
products.
•
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area and work with approved
safety equipment. Always wear an OSHA/NIOSH approved,
properly fitting face mask or respirator when using such tools.
Always follow proper operating
procedures as defined in this manual
even if you are familiar with the use of this or similar tools.
Remember that being careless for even a fraction of a
second can result in severe personal injury.
Preparing for your job
•
Wear proper apparel. Do not wear loose clothing, neckties,
rings, bracelets or other jewelry which may get caught up in
moving parts of machine. Do NOT wear gloves.
•
Wear protective hair covering to contain long hair.
•
Wear safety shoes with non-slip soles.
•
Wear safety glasses complying with United States ANSI
Z87.1. Everyday glasses have only impact resistant lenses.
They are not safety glasses. Use guards and eye shields.
•
Wear face mask or dust mask if operation is dusty.
•
Wear ANSI approved ear protection for extended operation.
•
Some coolants used for machining contain chemicals that
may be hazardous to your health if not used properly. Read
and understand all information on the coolant container and
protect yourself accordingly.
•
Be alert and think clearly. Never operate power tools when
tired, intoxicated or when taking medications that cause
drowsiness.
•
Focus your attention completely on your work. Looking
around, careless actions and other distractions can result in
serious injury.
Preparing the work area for your job
•
Do not use this machine in dangerous environments. Do not
use it in damp or wet locations. Do not expose it to rain.
•
Keep the work area clean. Cluttered work areas and work
benches invite accidents. Keep the area around the machine
clean of scrap metal, oil and grease.
•
Keep visitors at a safe distance from work area.
•
Keep children out of workplace. Make workshop childproof.
Use padlocks, master switches or remove switch keys to
prevent any unintentional use of power tools.
•
Provide adequate space around the Electric Hydraulic Press
and light the area properly with non-glare, overhead lighting.
•
Make certain the Electric Hydraulic Press is securely
anchored before use.
Maintaining your tool
•
Failure to follow the guidelines in this manual can result in
serious injury.
•
Disconnect the tool completely from its power supply before
performing any service, maintenance, repair or adjustments.
•
Follow OSHA lock-out, tag-out procedures to prevent
accidental machine starts.
•
Consult this manual for for the proper use, specific
maintenance, and adjustment procedures.
•
Keep tool lubricated and clean for safest operation.
•
Read and understand warnings posted on the machine and
in this manual. Replace the warning labels if they become
obscured or removed. Failure to comply with all of these
warnings can result in serious injury.
•
Before turning on the machine, check for damaged parts.
Check for alignment of moving parts, binding, breakage,
mounting issues and any other conditions that may affect
the tools operation. Replace any guard or damaged part that
does not function properly before using the tool.
•
Before cleaning, turn off the machine and disconnect it from
its power source. Use compressed air or a suitable brush to
clear chips or debris — do not use your hands.
Know how to use your tool
The operation of any tool can result in
foreign objects being thrown into the
eyes, which can result in severe eye damage. Always wear
safety goggles complying with United States ANSI Z87.1.
before commencing power tool operation.
Think safety! Safety is a combination of operator
common sense and alertness at all times when tool
is being used.
•
The Model 9661614 Electric Hydraulic Press is designed
and intended for use by properly trained operators. You
must be familiar with the proper and safe operation of a
manual Electric Hydraulic Press. Obtain proper training and
knowledge before operating this machine.
