Palmera PAC 450, Руководство пользователя

Страница: 14 / 20

GB14
related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the tool. Use the correct power tool for your application, The correct power
tools will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that can
not be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source before marking any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools, Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tools operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control
g) Use the power tool, accessories and tool bits etc. ,in accordance with these instructions
and in the manner intended for particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained
ADDITIONAL SAFETY RULES FOR GRASS TRIMMER
Be familiar with the controls and proper use of the equipment, this equipment is used for
cutting grass, please don’t intend to any unapt use, eg. Plse not use to brush cutte
• Only use this grass trimmer when a Residual Current Device (RCD) with a tripping
current of not more than 30Ma is in the circuit.
If an extension cord is used make sure it is for outdoor use and marked as such. The
recommended size of extension cord is not lighter than 1.0mm2 and a maximum of 10
meters in length.
Danger! The cutting elements continue to rotate after the motor is switched off.
• Before use check the supply and extension cord for signs of damage or ageing. If the
cord becomes damaged during use, disconnect the cord from the supply immediately. Do
not tough it before disconnecting the supply.
• Do not use the appliance if the cord is damaged or worn.
• Read the instruction carefully. Be familiar with the controls and proper use of the
equipment.
• Keep extension cord away from cutting elements.
• Wear ear, eye and dust protection at all times.
• Never allow children, people unfamiliar with these instructions to use the trimmer
• Avoid using the trimmer while people, especially children, infirm people or pets, are
nearly.
• Use the trimmer only in daylight or good artificial light.
• Never operate the trimmer with damaged guards or shields or without guards or shields
in place.
• Switch on the motor only when the hands and feet are away from the cutting means.
SEMAK