FULL BODY HARNESS
22. PRODUCT LABEL:
Annex A- Normative
Note:
This information from the Z 359.11 standard is required to be included in the instruction manual for
the end user
ANSI/ASSE Z359 Requirements for proper use and maintenance of Full Body Harnesses
Note:
these are the general requirements and information provided by ANSI/ASSE Z359, the Manufacturer
of this equipment may impose more stringent restrictions on the use of the products they manufacture, see
the Manufacturer's instructions)
1.
It is essential that users of this type of equipment receive proper training and instruction, including
detailed procedures for the safe use of such equipment in their work application. ANSI/ASSE
Z359.2,
Minimum Requirements for a Comprehensive Managed Fall protection Program
,
establishes guidelines and requirements for an employer's managed fall protection program,
including policies, duties and training; fall protection procedures; incident investigations; and
evaluating program effectiveness.
2.
Correct fit of a Full Body Harness is essential to proper performance. Users must be trained to
select the size and maintain the fit of their Full Body Harness.
3.
Users must follow manufacturer's instructions for proper fit and sizing , paying particular attention
to ensure that buckles are connected and aligned correctly , leg straps and shoulder straps are kept
snug at all times, chest straps are located in the middle chest area and leg straps are positioned and
snug to avoid contact with the genitalia should a fall occur.
4.
Full Body Harnesses which meet ANSI/ASSE Z359.11 are intended to be used with other
components of a personal fall arrest system that limit maximum arrest forces to 1800 pounds or less.
13
