Pallmann GECKO STAR 2.0, Руководство по эксплуатации

Страница: 18 / 19

Page 18 Gecko Star 2.0 01/2017
9.2.2 Replacing the spare fasteners
1. Switch the machine off.
2. Unplug the cord from the main power supply.
3. Loosen the 6 screws (7 = TX20) of the steel disc
4. Pull away the worn fasteners and remove any adhesive residue using a
suitable thinning agent.
5. Tighten the replacement fasters centering them into the proper locations.
6. Reassemble the disc again in reverse order.
10. Disposal
Power tools do not belong with household waste. Please observe the national
legislation and recycle the packaging, accessories and tool accordingly.
11. Trouble-shooting
Problem Possible Cause Action Step
Machine does not start
Power supply interrupted
Defective fuse
Cord or plug defective parts replaced
Brushes worn out or broken
Have proper repair technican
replace faulty parts
Excessive dust produced while
sanding
Dust bag is not properly attached
Dust bag full User to check fastening of dust bag
Empty dust bag
Sanding ineffective
Sandpaper worn out
Speed dropping Retightening V-belt
Brushes worn out or broken
Change sandpaper
Have proper technican replace
faulty parts
Frequent replacement of the V-
belt necessary
Belt pulley damaged
Have proper technican replace
faulty parts
High level of vibration Machine wearing parts worn out
Have proper technican replace
faulty parts