Pallmann GECKO FLEX, Перевод оригинального руководства

Страница: 9 / 16

9 09/2010
During operation, never set tool down while the sanding plate is running. The GECKO FLEX
may only be placed down when it has come to a total stop.
Caution!
If you sand over the electrical cable, there is a danger to life through electric shock.
Never sand towards the cable.
5.5 Approved clothing
Caution!
Wear suitable workwear! While operating and performing any work on the
GECKO FLEX, do not wear loose clothing. Such clothing may be caught by moving parts.
5.6 Noise emissions from the tool
The following emissions values have been measured for the GECKO FLEX parquet edge
sander in accordance with EN 60745:
Sound pressure level Idling 88.6 dB Under load 86.4 dB
Sound power level
Idling 99.6 dB Under load 97.4 dB
Measuring inaccuracy:
+ / - 1.5 dB
The noise generated by using the tool is dependent on various factors.
Local conditions, such as the size of the room and the properties of the floor surface have an
impact on noise emissions.
Caution! ! Wear hearing protectors! The levels of noise generated are damaging to the
hearing. While operating the tool, you must wear hearing protectors. Use the capsule
hearing protectors which are supplied as an accessory.
5.7 Hand/arm vibration
The following vibration levels have been measured, in accordance with EN 60745:
Sanding plate with velcro Vibration emissions value: a
h/DS
= 2,6 m/s
2
Measuring inaccuracy: K = 1,5 m/s
2
Sanding plate with clamping disc Vibration emissions value: a
h/DS
= 4,9 m/s
2
Measuring inaccuracy: K = 1,5 m/s
2
The declared vibration emission level represents the main applications of the tool. However if the tool
is used for different applications, with different accessories or poorly maintained, the vibration
emission may differ. This may significantly increase the exposure level over the total working period.