Pallmann GECKO FLEX, Перевод оригинального руководства

Страница: 8 / 16

8 09/2010
4. Intended use
The GECKO FLEX parquet edge sander is suited exclusively to sanding wood floors, staircases
and landings. Outdoor use is not permitted. Any other use is not permitted.
The manufacturer does not accept any liability for damage which occurs during improper use.
5. Safety
5.1 General information
Following safety instructions guards against injury and prevents improper use of the tool.
All users of this tool and persons involved in its assembly, maintenance or repair must have
read and understood the contents of this operating manual before beginning their work.
Particular attention should be paid to the sections featuring additional symbols.
5.2 Improper use
The GECKO FLEX is not suitable for brushing, polishing, roughing, abrasive cutting or any
comparable purpose. Failure to adhere to this directive can cause serious personal injury and
damage to property.
5.3 Original parts and accessories
Original parts and accessories have been especially designed for the GECKO FLEX.
We would like explicitly point out that other parts may not be used in their place. To do so
can negatively impact upon the safety of the tool.
This applies particularly to the tool’s sanding disc. The manufacturer excludes all liability for
damage occurring through the use of non-original parts.
5.4 Safety instructions for before and during operation
Before use, always check all parts of the tool for damage and wear. Parts which are placed
under severe stress, such as the sanding plate, are particularly susceptible to breaking off
and cracks. The damaged parts must be replaced immediately with new ones.
Caution!
All parts which are subjected to excessive wear, such as sanding plates, brushes, etc.
are not covered by any kind of warranty.