6
6. Secure nut and washer using an adjustable wrench to fasten the entire stand to the base
module (Figure 6).
Figure 6
Secure bolts with nuts and washers
7. Attach an extension module(s) using a fork lift or hoist on the top of the base module as
follows:
NOTE:
Extension module is not used for the 1000 L
- Attach the two lifting plates to the top of the extension module by dropping one end over
a position pin and aligning the other side with a bolt into the hole. Fasten down with a
washer and nut and the adjustable wrench (Figure 7). (The lifting plates will be used to
lift the extension module)
Figure 7
Lifting plate secured to top of extension module
- Attach crane or hoist carabiner to the two locking plate eyes (Figure 8).
Figure 8
Crane secured to each lifting plate eye with a chain
Lifting plate
