Palfinger V 1000 LQ, Инструкция по монтажу

Страница: 8 / 34

4
Introduction
General
This publication contains the information required to fit or install the Quickfit
“V” Series
Models to a suitable vehicle.
If any doubt exists as to the vehicle's suitability for having this type of lift fitted, the installer
should contact the nearest PALFINGER Tail Lifts Ltd factory who will advise the installer on
the suitability of his application.
Modifications
If it is desired to make a modification to the lift, or to the manner of its fitting, PALFINGER
Tail Lifts Ltd. are prepared to consider advising on the suitability of such modification
provided that such request is made in writing to the Engineering Department before the
modification or departure from fitting instructions is carried out.
If PALFINGER Tail Lifts Ltd. approves such modification or departure from fitting instructions
they will give their written authorisation which shall be retained by the person in receipt of
such written approval.
All liability under the provision of the Consumer Protection Act 1987 shall be that of a
person, firm or company responsible for any unauthorised modification or departure of fitting
instructions and such liability shall include a complete indemnity to PALFINGER Tail Lifts
Ltd. against any claim being made by or on behalf of the person suffering such loss or
damage.
Location Diagram
View of Lift
1. Column
2. Runner
3. Platform
4. Platform Catch
5. Stowlock
6. Top Flap (RQR518 only)