Palfinger ILSL 30 Скачать руководство пользователя

Страница: 8 / 35

Revision 1.0

Improper operation of this liftgate may result in severe personal injury or death. DO NOT operate unless you

have been properly instructed, have read and are familiar with the procedures in this manual. We have

designed this manual to illustrate the steps needed for the basic operation of this ILSL liftgate. It also provides

safety information and simple preventive maintenance tips.

This manual is not intended for use as a repair or troubleshooting guide. Repairs should be performed by an

PALFINGER Liftgates Authorized Service Center.

This Manual has been designed for use in conjunction with the ILSL series liftgate only which is designed for

different capacities. You have different options to determine the type of your Liftgate:

1) Refer to the serial number tag on the Liftgate.

2) Ask your employer or lessor.

3) Call your PALFINGER Liftgates Authorized Service Center for assistance.

4) Call PALFINGER Liftgates for assistance in the USA at 888-774-5844. You can also contact PALFINGER

Liftgates by fax (562) 924-8318, or on the internet-

www.PALFINGER.com

If you are facing any problems or are in need of repair, contact PALFINGER Liftgates for information regarding

experienced and trained Authorized Service Center in your area.

Replacement manuals are available, just call us & order your manuals for FREE.

Содержание ILSL 30




































Результаты поиска

Содержание ILSL 30

Отзывы:

Похожие инструкции для ILSL 30

Бренды по названию

Популярные бренды

Palfinger ILSL 30, Руководство пользователя

Результаты поиска

Содержание ILSL 30

Отзывы:

Похожие инструкции для ILSL 30

Бренды по названию

Популярные бренды