manualshive.com logo in svg

Palfinger C1500L, Руководство пользователя, Страница: 321 / 435

Поделиться
Скачать
Palfinger C1500L Скачать руководство пользователя страница 321

70

Moving to the BDF Position

Turn the rotary switches

(27)

 and

(29)

 simultaneously up-

ward and hold them in this position until the torsion frame is 
located above its horizontal position.

Turn the rotary switch

(30)

 upwards.

The platform moves to the preset BDF position.

Turn the rotary switches

(27)

 and

(29)

 simultaneously up-

ward and hold them in this position until the platform has 
reached the loading position.

Folding In and Retracting the Platform

Turn the rotary switches

(27)

 and

(29)

 simultaneously 

downward and hold them in this position until the platform 
has reached the ground.

Protect your hands with gloves.

Pull the handle with both hands to fold back the folding part 
of the platform.

Close the platform interlock (if present).

Turn the rotary switch

(30)

 upward and hold it in this posi-

tion until the platform has reached the vibration safeguard.

The platform automatically folds over and then lifts into the 
retraction position. Subsequently it retracts completely and 
lifts into the vibration safeguard.

Содержание C1500L




















































































































































































































































































































































































































































Отзывы:

Нет отзывов