Palazzetti ECOFIRE WILMA IDRO 18, Общая информация - Предупреждения - Установка - Обслуживание

Страница: 34 / 113

Do not use the sliding system of the boiler to load
pellets into the container.
Removing the stove:
To remove the stove, proceed as follows (Fig. 6.3):
1. Open the door;
2. remove the safety bracket (A - fig.6.3) by
undoing its two bolts
3. lower the lever to release the sliding mechanism
(B - ¿ g.6.3)
4. extract the stove by gripping the interior of the
combustion chamber.
This actuates a safety microswitch which turns off
the electrical power supply.
Fitting the stove:
To ¿ t the stove, proceed in the reverse order:
‡ lower the lever to release the sliding mechanism
(B - ¿ g.6.3)
‡ push the stove into its seat until you are sure
the automatic locking mechanism has engaged
‡ restore the safety bracket and secure it with
its two bolts
‡ close the door
Electrical power is restored by the safety microswitch.
A
B
Fig. 6.3
34