Palazzetti EcoFire IDRO, Инструкция по установке, эксплуатации и обслуживанию

Страница: 47 / 140

INSTALLATION MANUAL
- cod. 004771060 - 09/2011 - Palazzetti - PN - Italy
47/140
USE AND & MAINTENANCE
EN
G
L
ISH
8.3.2
6HWWLQJWKHGLVSOD\PRGH
The data shown on the display when this is in standby mode can be set.
Use the arrow buttons to go to the setup menu ;
a) Use the
button to scroll the submenu
E 6HOHFWVXEPHQX³´DQGFRQ¿UPE\SUHVVLQJ
.
c) Set one of the following values using the
and
buttons:
“OFF”
‡
The display remains on the last operation set by the user;
“1”
‡
All operating parameters are displayed cyclically;
“2”
‡ 7KHURRPRUZDWHUSUREHWHPSHUDWXUHLVVKRZQEDVHGRQWKHW\SHRIFRQ¿JXUDWLRQ
“3”
‡
The current time is shown
“4”
‡ 7KHRSHUDWLQJDXWRQRP\LQKRXUVEHIRUHKDYLQJWRUH¿OOWKHKRSSHULVVKRZQ
, If the function
³¿OOLQJ´KDVEHHQDFWLYDWHG
d) Press
WRFRQ¿UPWKHVHWWLQJV
8.3.3
6HWWLQJWKHGLVSOD\EULJKWQHV
Display brightness when in standby mode can be set.
Use the arrow buttons to go to the setup menu ;
a) Use the
button to scroll the submenu
E 6HOHFWVXEPHQX³´DQGFRQ¿UPE\SUHVVLQJ
.
c) Set the desired brightness using the
and
buttons and press
WRFRQ¿UP
8.3.4 Setting the volume
The volume of the buzzer can be set based on requirements:
Use the arrow buttons to go to the setup menu ;
1) Use the
button to scroll the submenu
6HOHFWVXEPHQX³´DQGFRQ¿UPE\SUHVVLQJ
.
3) Set the desired volume using the
and
buttons and press
WRFRQ¿UP
8.3.5
6HWWLQJWKHW\SHRISHOOHWV
The type of pellets used can be set:
Use the arrow buttons to go to the setup menu ;
a) Use the
button to scroll the submenu
E 6HOHFWVXEPHQX³´DQGFRQ¿UPE\SUHVVLQJ
.
c) Set one of the following values using the
and
buttons:
“1”
‡
Small pellets
“2”
‡
Medium-sized pellets (factory setting)
“3”
‡
Large pellets
d) Press
WRFRQ¿UPWKHVHWWLQJV