ITALIANO
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
004778300 14/09/2020
21
7.2 Configurazione 2 - Sonda ambiente
1
6
1
6
Sonda temperatura
ambiente
T
T
Componenti compresi nella caldaia
La configurazione 2 è la configurazio-
ne di default per questo apparecchio.
In questo caso non è necessario appor-
tare alcuna modifica.
Impostare la configurazione 2 per accendere e
spegnere l'apparecchio manualmente o in modo
programmato quando l'apparecchio è diretta
mente collegato ai termosifoni.
L'apparecchio modula la potenza in funzione
della temperatura ambiente letta dalla sonda
ambiente posta a bordo della caldaia stessa.
È possibile impostare la funzione
“Eco-mode” per far sì che l'apparecchio
si spenga o si riaccenda in base alla
temperatura ambiente impostata.
In questa configurazione è possibile impostare
anche la funzione antigelo.
7.2.1 Allacciamento elettrico sonda ambiente
L'apparecchio esce di fabbrica con la sonda am
biente già collegata ai morsetti e posizionata sul
pannello posteriore (
È possibile posizionare la sonda ambiente in un
altro locale per rilevare la temperatura dell'am
biente desiderato.
1
6
Fig. 26
Sonda
temperatura
ambiente
È importante verificare che l'apparec-
chio sia impostato nella
Configurazio-
ne 2