![background image](http://html1.mh-extra.com/html/palax/c900-2/c900-2_instruction-manual_3300016010.webp)
10
1-2020
Translation
Before use
Always carry out the required preparations on both the machine and the conveyor be-
fore starting the operation.
Make sure that all other people stay outside the operating range.
Only use a fault-free PTO shaft and attach the chain for the shaft-guard. The permissible
revolutions range of the PTO shaft is 450–480 r.p.m.
Only operate the machine on a sufficiently firm and level surface.
Only operate the machine in an adequately lit space.
Keep the tractor-powered machine connected to the three-point linkage. Also ensure that
sufficient space is provided for the PTO shaft and its guard.
Always check that all the covers are intact and properly fastened.
Always check that the crosscut saw-blade is intact.
Always ensure that the electric conductors are intact.
Always check that all the controls are operational.
Always check the oil level and make sure that the hydraulic hoses and components are
free of damage.
Before starting the work, make sure that the machine is firmly in position.
During operation
Carelessness during the cut-off operation constitutes a major hazard!
During the cut-off operation, make sure that the tree at the cutting point always leans
against the support roller of the crosscut deck and the in-feed roller: danger of rolling
over!
Exercise particular caution when cutting knotty or crooked logs, because, as a result of
faulty cutting, the log might roll over or twist the saw-blade with enough force to break it.
Keep the working space clean and clear of foreign objects.
Always stop the machine and disconnect the power supply cable or the PTO shaft be-
fore servicing.
Only cut one log at a time.
Danger! Stay away from moving parts.
1.8
Noise emission and vibration
Equivalent continuous A-weighted sound-pressure level at the workstation is 87.5 dB (A)
and the sound power level is 102,0 dB (A). The vibration emission values do not exceed
2.5 m/s2.
1.9
Responsibilities of the operator
The machine may only be used to produce firewood.
All the safety-related devices are necessary to ensure a sufficient level of safety.
The C900.2 is a very safe machine provided that the instructions supplied are properly
followed, the regular maintenance routines are duly executed and the work is carried
out without haste.
It is the responsibility of the operator to ensure before the work is started that all the
safety-related devices are in perfect order and the machine has been serviced in a due
manner.
The operator is responsible for ensuring that no one else is subjected to any danger.
Modifying the construction of the machine is prohibited.
The machine must never be operated under the influence of alcohol or drugs.
Содержание C900.2
Страница 37: ...37 1 2020 Translation 12 ELECTRIC DIAGRAMS ...
Страница 38: ...38 1 2020 Translation ...