paladin JRB SMART-LOC, Руководство оператора

Страница: 11 / 31

11
OM90A
EQUIPMENT SAFETY PRECAUTIONS
MEASURE TRAVEL HEIGHT AND LENGTH PRIOR TO
TRANSPORTING
The overall travel height and/or length of the prime mover will be increased if the coupler
and attachment are installed. Do not rely on original prime mover specifications to
determine overall dimensions. Actual dimensions will be affected by specific coupler
and attachment combination.
The JRB coupler is designed with a lift eye for lifting and placing material. It is de-
signed for the convenience of the operator. Consult your prime mover manufacturers
specifications for lifting procedures and capacities. Incorrect applications and uses
and failure to follow these instructions may result in severe injury or death.
LIFT EYE USAGE
In order to use the lift eye correctly and safely the attachment must first be removed
from the coupler. Not only is this the safe method, it also increases the lifting capac-
ity of the machine. When an attachment is in use with the coupler, the chain, cable
or other lifting device can contact it and may cause interference, damage or poten-
tial for unexpected release.
The lifting device must always be removed when changing attachments. If the
device is in the area of the coupler or attachment during coupling, it may cause an
incomplete locking of the coupler to the attachment or damage to the coupler and/or
the attachment.
WARNING!
The JRB Coupler has been extensively studied and tested, for both efficiency and
safety, using the JRB hydraulic kit.
The JRB Coupler has not been studied or tested using any other hydraulic system.
Since hydraulic systems vary in many aspects, JRB cannot know whether the
coupler may be operated safely with a hydraulic system that is not its own. Because
of the unknown characteristics of any other hydraulic system, JRB takes no
responsibility for the safety of a JRB coupler if it is operated with a hydraulic system
other than the one provided by JRB.
ONLY USE JRB PROVIDED HYDRAULIC KIT TO OPERATE
THE COUPLER
WARNING!
TRANSPORTING THE ATTACHMENT
• Travel only with the attachment in a safe transport position to prevent uncontrolled
movement. Drive slowly over rough terrain and slopes.
• When transporting on a trailer secure attachment at recommended tie down
locations using tie down accessories that are capable of maintaining attach-
ment stability.
• When driving on public roads use safety lights, reflectors, Slow Moving Vehicle signs
etc., to prevent accidents. Check local government regulations that may affect you.
• Do not drive close to ditches, excavations, etc., as a cave-in could result.
• Do not smoke when refueling the prime mover. Allow room in the fuel tank for
expansion. Wipe up any spilled fuel. Secure cap tightly when done.