manualshive.com logo in svg

paladin FFC PREPARATOR LAF3566, Руководство оператора, Страница: 21 / 31

Поделиться
Скачать
paladin FFC PREPARATOR LAF3566 Скачать руководство пользователя страница 21

MR955512

21

OPERATION

REMOVAL FROM STORAGE

•  Wash unit and replace any damage and/or missing parts.

• 

Lubricate grease fittings.

•  Check hydraulic hoses for damage and replace as necessary.

LIFT POINTS

 

Lifting points are identified by lifting decals where required. Lifting at other points is un

-

safe and can damage attachment. Do not attach lifting accessories around cylinders or in any 

way that may damage hoses or hydraulic components. See Diagram:

• 

Attach lifting accessories to unit at recommended lifting points.

• 

Bring lifting accessories together to a central lifting point.

• 

Lift gradually, maintaining the equilibrium of the unit.

WARNING!  Use lifting accessories (chains, slings, ropes, shackles and etc.) that are 

capable of supporting the size and weight of your attachment. Secure all 

lifting accessories in such a way to prevent unintended disengagement. 

Failure to do so could result in the attachment falling and causing serious 

personal injury or death.

Содержание FFC PREPARATOR LAF3566
































Отзывы:

Нет отзывов